F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Front Door Striker: Adjustments
STRIKER ADJUSTMENT
NOTE: Before carrying out the striker adjustment, refer to Striker Pre-Adjustment Inspection.
1. NOTE: Scribe before removing.
Loosen the striker retaining bolts.
2. Adjust the door striker and tighten the striker retaining bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
3. To install, reverse the removal procedure.
Striker Pre-Adjustment Inspection
1. Check for the door springing upward while opening.
-
If the door striker is adjusted too low, adjust the door striker.
-
If the door latch is binding or sticking, lubricate the door latch.
2. Make sure that the door does not spring upward excessively while opening.
-
If the door striker is adjusted too far inboard, adjust the door striker.