F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
43. CAUTION: Failure to correctly install the fuel pump heat shield may result in engine damage.
NOTE: Make sure the ground strap is mounted on the stud closest to the glow plug module.
Position the fuel pump heat shield, ground strap and fuel tube bracket. Install the bolt and retaining nuts.
^
Tighten the fuel line bracket nuts to 7 Nm (62 lb-inch).
^
Tighten the remaining fasteners to 13 Nm (115 lb-inch).
44. NOTE: Use a socket to aid in installing the pushnuts.
Position the glow plug module cover and install the new pushnuts.
45. NOTE: Install a new press-in-place gasket.
Install the crankcase vent oil separator and bolts.
^
Tighten to 13 Nm (115 lb-inch).
46. Connect the crankcase vent oil separator tube.
