F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
8. CAUTION: Do not bend or flex the heater supply tube or damage to the tube may occur.
NOTE: Install a new O-ring seal.
Install the RH heater supply tube, bolt and nut.
^
Tighten to 13 Nm (115 lb-inch).
9. Install the glow plug module bracket and bolts.
^
Tighten to 13 Nm (115 lb-inch).
10. NOTE: The engine harness must be positioned between the glow plug module bracket and the heater supply tube.
Position the engine wiring harness and install the bolt.
^
Tighten to 13 Nm (115 lb-inch).
