F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Torque Chart - EGR-OC Pipe Bracket-to-LH Cylinder Head Bolt
14. Connect the EP sensor tube fitting onto the EGR-OC pipe.
^
Tighten to 20 Nm (177 lb-inch).
15. Install the exhaust downpipe.
Exhaust Downpipe
Exhaust Downpipe - 6.4L Diesel
Removal
NOTE: Exhaust fasteners are of a torque prevailing design. Use only new fasteners with the same part number as the original. Torque values must be
used as specified during reassembly to make sure of correct retention of exhaust components.
1. Remove the transmission.
2. If necessary, remove the auxiliary air intake from the cowl.