F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator - LH
TEMPERATURE BLEND DOOR ACTUATOR - LH
Removal and Installation
1. Remove the heater core and evaporator core housing.
2. Remove the floor duct screw.
3. Remove the floor duct.
4. Disconnect the LH temperature blend door actuator electrical connector.
5. Remove the 2 LH temperature blend door actuator screws.
6. Remove the LH temperature blend door actuator.
7. To install, reverse the removal procedure.