F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Daytime Running Lamp: Adjustments
AUTOLAMPS TIME DELAY ADJUSTMENT
NOTE:
-
The time delay can be programmed through the instrument cluster message center using the message center buttons (if equipped) or using the
following steps.
-
Steps 2 through 5 must be carried out within a 10-second period.
1. Start with the ignition switch off and the headlamp switch in the AUTOLAMPS ON position.
2. Place the headlamp switch in the OFF position.
3. Place the ignition switch in the RUN position.
4. Place the ignition switch in the OFF position.
5. Place the headlamp switch in the AUTOLAMPS ON position. The exterior lamps turn on at this point.
6. Wait the desired amount of time and place the headlamp switch in the OFF position (maximum of 3 minutes). The exterior lamps turn off and the
autolamp time delay is now set.
