F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Part 2
Removal and Installation
1. Drain the fuel and turbocharger cooling system.
2. If necessary, remove and discard the tie straps.
3. If necessary, position aside the coolant hose clip.
4. Disconnect the coolant hose being serviced from the components on each end of the coolant hose and remove the coolant hose.
5. To install, reverse the removal procedure.
-
If necessary, install new tie straps.
-
Fill and bleed the fuel and turbocharger cooling system.