F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
5. CAUTION: Position the notch in the tool over the raised area on the top of the exhaust gas recirculation (EGR) valve, or damage to the
EGR valve can occur.
Position the special tool on top of the EGR valve.
6. CAUTION: Make sure that the special tool hooks are positioned on the exhaust gas recirculation (EGR) valve body as shown, or damage
to the EGR valve can occur.
NOTE: The hooks are labeled RH and LH for correct placement. Make sure they are installed in correct location.
Using the Allen-head bolts supplied with the special tool, install the hooks on the middle plate of the special tool and position the hooks on the
EGR valve body as shown.
7. Position the special tool lower plate below the flange on the valve body and install the bolt to attach it to the middle plate of the special tool.
