F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
Steering Wheel: Service and Repair
Steering Wheel
Removal and Installation
1. Remove the driver air bag module. For additional information, refer to Air Bag Systems.
2. Turn the steering wheel to the straight-ahead position.
3. Remove and discard the steering wheel bolt.
^
To install, tighten to 40 Nm (30 ft. lbs.).
4. Remove the steering wheel while routing the wires from the clockspring through the steering wheel.
5. NOTE: A new steering wheel bolt must be installed.
To install, reverse the removal procedure.
