F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Radio/Stereo: Service and Repair
Radio Removing Tool
SPECIAL TOOL(S)
REMOVAL
NOTE: The following removal and installation procedure applies to all audio units.
1. Disconnect the battery ground cable.
2. Remove the audio unit from the instrument panel.
1
Use the special tool to release the audio unit retaining clips.
2
Apply outward pressure on the special tool while pulling the audio unit away from the instrument panel.
3
Remove the audio unit.
^
Disconnect the audio unit wiring.
INSTALLATION
1. To install, reverse the removal procedure.