F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Braking Sensor/Switch: Description and Operation
Brake Lamp Switch
Brake Lamp Switch
The Brake Lamp Switch signals the Powertrain Control Module (PCM) with a battery positive voltage (B+) signal whenever the vehicle brake pedal
is applied.
The signal informs the PCM to disengage the torque converter clutch, speed control and auxiliary idle control (if equipped).
If all the stoplamp bulbs are burned out (open), a high voltage is present at the PCM due to a pull-up resistor in the PCM. This provides fail-safe
operation in the event the circuit to the Brake Lamp switch has failed.