F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
15. Remove the power brake booster nuts, and remove the power brake booster.
16. To install, reverse the removal procedure.
-
Install new O-ring seals on the power steering pressure fittings.
-
Bleed hydro-boost.
Brake Booster - Hydro-Max
BRAKE BOOSTER - HYDRO-MAX
Removal
CAUTION: Do not depress the brake pedal while the hydraulic fluid supply line is disconnected. The inlet pressure port check ball may be dislodged
which will result in a non-functional backup system.
1. Disconnect the battery.
2. Remove the support bracket bolt and nut.
3. Remove the ground wire nut and the ground wire.
