F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Connecting Rod: Specifications
Connecting Rod Bolt
Install the connecting rod cap.
1. Coat the connecting rod bearing half with Ford Engine Assembly Lubricant D9AZ-19579-D or equivalent meeting Ford specification
ESR-M99C80-A. Position the connecting rod cap onto the connecting rod and seat the cap onto the crankshaft journal.
2. Install the nuts. Tighten the nuts in two stages.
^
Stage 1: Tighten the nuts to 71 Nm (53 ft. lbs.).
^
Stage 2: Tighten the nuts to 108 Nm (80 ft. lbs.).