F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
1. Assemble the special tools and special tool 303-052.
2. Tighten special tool 308-052 until the crankshaft damper wear ring is pulled free from the hub of the crankshaft vibration damper.
Installation
All vehicles
1. Using the special tools and a ball peen hammer, install the new crankshaft damper wear ring.
1. Insert the crankshaft damper wear ring in the special tools.
2. Position the special tools and crankshaft damper wear ring into the crankshaft vibration damper. Using a ball peen hammer, seat the crankshaft
damper wear ring into the crankshaft vibration damper.
Vehicles with automatic transmission
2. Install a suitable flywheel holding tool.
All vehicles
3. Install the special tool.
