F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Refrigerant Pressure Sensor / Switch: Service and Repair
Pressure Cutoff Switch
REMOVAL
1. Disconnect the electrical connector.
2. Remove the pressure cut-off switch.
INSTALLATION
1. Follow the removal procedure in reverse order.
^
Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
