F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
4. With the flats of the clockspring aligned to the flats of the steering column, slide the clockspring onto the steering column engaging the retaining
tabs.
NOTE: Slight turning of the clockspring rotor is allowable for alignment purposes to the steering column.
5. Remove the restraint system diagnostic tool from the vehicle harness side of the clockspring electrical connector.
6. Install the clockspring wire harness and electrical connectors.
1
Route the clockspring wire harness down the side of the steering column and into the holders.
2
Connect the clockspring electrical connectors.
^
Install the electrical connectors into the bracket.
7. Install the key-in-ignition warning indicator switch.
8. Install the Passive Anti-theft System (PATS) transmitter.
