F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Ignition Switch Lock Cylinder - Functional
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1. Insert the ignition key and turn to the RUN position.
2. Using a 1/8-inch drift, press the ignition switch lock cylinder release pin through the access hole while pulling out the ignition switch lock
cylinder.
3. To install, reverse the removal procedure.
^
Verify ignition switch kick cylinder operation.