ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

With CII Power Steering Pump|Page 5498 > < Sector Shaft Arm - F-250, F-350, F-450, F-550|Page 5492
Page 1
background image

Power Steering Bleeding: Service and Repair
With CII Power Steering Pump

Special Tools

CAUTION:  If the air is not purged from the power steering system correctly, premature power steering pump failure could result. This condition can
occur on pre-delivery vehicles with evidence of aerated fluid or on vehicles that have had steering component repairs.

1. NOTE:  A whine heard from the power steering pump may be caused by air in the system. The power steering purge procedure must be performed

prior to any component repair for which power steering noise complaints are accompanied by evidence of aerated fluid.

Remove the reservoir cap. Check the fluid.
-

Use Motorcraft MERCON Multi-Purpose ATF XT-2-QDX or MERCON equivalent.

2. Tightly insert the stopper of the Vacuum Pump into the reservoir.
3. Start the vehicle.

With CII Power Steering Pump|Page 5498 > < Sector Shaft Arm - F-250, F-350, F-450, F-550|Page 5492