F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
1. Using a suitable press, install the new wheel bolt aligning the serrations in the wheel hub flange made by the original wheel bolt.
2. On vehicles with dual rear wheels, install the new wheel bolt aligning the serrations in the wheel hub flange made by the original wheel bolt.
-
Place four flatwashers over the outside end of the wheel bolt and thread a standard wheel nut with the flat side against the washers.
-
Tighten the wheel nut until the wheel bolt head seats against the back side of the hub flange.
3. Remove the lug nut and flatwashers.
4. On vehicles with dual rear wheels, go to Step 7.
5. Install the rear wheel hub assembly.
6. Install the disc brake caliper and rotor.
7. Install the wheel and tire assembly.
8. Lower the vehicle.
