F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
5. Install progressively larger shims on the right side until the largest shim selected can be assembled by hand.
6. Install the right side bearing cap, and tighten the bolts.
7. Rotate the differential case to make sure it rotates freely.
Measuring backlash
8. Using the special tool, measure ring gear backlash.
^
If the backlash is within specification, go to Backlash within specification in this procedure. The specification shown is the full allowable
range.
^
If a zero backlash condition occurs, go to Zero backlash in this procedure.
^
If the backlash is not within specification, go to Backlash not within specification in this procedure.