F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
1. Prelubricate each clutch disc and soak the clutch friction plate for at least 15 minutes in Additive Friction Modifier C8AZ-19B546-A or equivalent
meeting Ford specification EST-M2018-A.
2. CAUTION: Do not mix the differential clutch packs or shims from one side with the other.
NOTE: The Belleville spring is it dished plate.
Assemble the differential clutch packs (without the shims and Belleville springs) on the respective differential side gears.
3. NOTE: Use the Traction-Lok Clutch Gauge Mandrel for the procedure.
Clamp the bolt head of the Traction-Lok Clutch Gauge in a vise.
^
Install the differential clutch pack and the differential side gear (without the shim or the Belleville spring) on the gauge.
4. Position the Traction-Lok Clutch Gauge disc on top of the differential clutch pack.
