F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
5. Install the special tool and, with a soft-faced hammer, drive the pinion out of the front bearing cone and remove it through the rear of the housing.
6. NOTE: Remove the collapsible spacer and discard it.
Use the special tool to remove the pinion bearing.
7. NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
Remove the outer differential bearing cup with the special tools.
8. Remove the inner differential bearing cup with the special tool.
Installation
Using 205-098
