F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
1. For vehicles equipped with a manual transmission, align the index marks and connect the front driveshaft to the transmission. Install the new bolts.
^
Hand-tighten only: do not tighten at this time.
2. For vehicles equipped with an automatic transmission, align the index marks and slide the driveshaft slip yoke onto the output shaft.
3. Position the center support bearing and install the bolts.
^
Hand-tighten only; do not tighten at this time.
4. Tighten the driveshaft to transmission flange bolts and the driveshaft center bearing bolts.
