F 550 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
2. Index-mark the driveshaft at the axle flange.
3. Disconnect the driveshaft from the axle flange.
1. Remove and discard the bolts.
2. Remove and discard the U1oint retainers.
-
Using mechanics wire, support the driveshaft.
4. Disconnect the driveshaft from the coupling shaft.
1. Remove and discard the bolts.
2. Remove and discard the U-Joint retainers.
-
Using mechanics wire, support the driveshaft.