Festiva L4-81 1.3L SOHC (1988)
2.
Carefully release horn pad hook so it is not damaged or deformed. Remove horn pad.
3.
Loosen three (3) screws holding power (+) side of horn switch contacts, Figure 7. Adjust power (+) side of contact to create a 0.5 to 1.0 mm gap
between power (+) and ground (-) side of switch contacts.
4.
Tighten three (3) screws holding power (+) side of horn switch contacts.
5.
Reinstall horn pad and two (2) retaining screws.
6.
Check horn for proper operation.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP871106A
TIME:
0.3 Hr.
DLR. CODING: Basic Part No. 13864 - Code: 41
