Festiva L4-81 1.3L SOHC (1988)
Turn Signal Switch: Service and Repair
Headlamp & Turn Signal Switches
Fig. 4 Headlamp/turn signal switch assembly
The headlamp/turn signal switch is mounted on the steering column as part of the combination switch assembly, Fig. 4.
1.
Remove combination switch as outlined previously.
2.
Remove attaching screws, then separate headlamp/turn signal switch from combination switch.
3.
Rotate switch handle to parking light detent.
4.
Remove switch handle attaching screws and plate, then rotate handle out of switch body. Use care to prevent loss of detent balls and springs.
5.
Reverse procedure to install.
