Festiva L4-81 1.3L SOHC (1988)
Wheel Hub: Technical Service Bulletins
Wheel Hub/Rotor Assembly - Removal Revision
Article No.
91-25B-13
12/20/91
^
SHOP MANUAL - 1988 - PAGE 11-16-7 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD
ASSEMBLY REVISED
^
SHOP MANUAL - 1989 - PAGE 11-16-7 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD
ASSEMBLY REVISED
^
SHOP MANUAL - 1990 - PAGE 11-16-7 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD
ASSEMBLY REVISED
^
SHOP MANUAL - 1991 - PAGE 04-01-12 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD
ASSEMBLY REVISED
^
SHOP MANUAL - 1992 - PAGE 04-01-11 - WHEEL HUB/ROTOR ASSEMBLY REMOVAL FROM STEERING KNUCKLE DUST SHIELD
ASSEMBLY REVISED
FORD:
1988-92 FESTIVA
ISSUE:
The procedure for removal of the Wheel Hub/Rotor Assembly from the Steering Knuckle Dust Shield Assembly must be revised to indicate
that tool T87C-1104-A Knuckle Puller must be modified. The following Shop Manuals are affected on the pages indicated:
