Festiva L4-81 1.3L SOHC (1988)
FIGURE 17
3.
While pulling back on the transaxle release lever, measure the clearance between the lever and cable pin.
Thread the adjuster in or out until the clearance between the cable pin and lever is 0.06 to 0.10 inch (1.5 to 2.5 mm), Figure 17.
4.
Check freeplay at the clutch pedal. If it is not within specification, inspect the clutch release components and service as required.
OTHER APPLICABLE ARTICLES: 87-25-5
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION: 880617A
TIME:
0.3 Hr.
DLR. CODING: Basic Part No. 7550 - Code: 07
