ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Body Emblem: > < Trunk / Liftgate Switch|Locations
Page 1
background image

Body Emblem: Customer Interest
Emblem - Chrome Peeling/Moisture Inside

TRIM - EXTERIOR - FORD OVAL EMBLEM - CHROME PEELING OR MOISTURE INSIDE - VEHICLES BUILT BEFORE 4/01/90

Article No. 90-10-1

FORD:

1988-90 FESTIVA

ISSUE:

The front and rear Ford oval emblems may show signs of moisture inside the emblem or exhibit chrome peel. This usually occurs after
exposure to severe weather conditions. It is caused by poor sealing of the emblem material.

ACTION:

Install a new front or rear Ford Oval emblem as required. Refer to TSB 88-10-4 for the service replacement procedure of the
adhesive-backed front emblem. The rear emblem is a pop in and out nameplate with plastic tabs on each end.

PART NUMBER

PART NAME

CLASS

EOBZ-8A223-B

Ford Oval - Front

B

E8BZ-6142528-H

Ford Oval - Rear

B

OTHER APPLICABLE ARTICLES:

88-10-4

WARRANTY STATUS:

Eligible Under Basic Warranty Coverage

OPERATION DESCRIPTION

TIME

901001A

Install Front Emblem

0.4 Hr.

901001B

Install Rear Emblem

0.4 Hr.

DEALER CODING

BASIC PART NO.       CONDITION CODE

8A223

03

OASIS CODES:

1052, 1050

All Technical Service Bulletins for Body Emblem: > < Trunk / Liftgate Switch|Locations