Festiva L4-81 1.3L SOHC EFI (1989)
d.
Left rear
10.
Tighten the left front bolt, right rear bolt and left rear nut to 28-38 lb-ft (38-51 N-m). Do not tighten the right front bolt.
11.
Loosen the right front bolt five turns.
12.
Move the seat to the full forward and full rear positions three times to equalize the tracks.
13.
Tighten the right front seat track bolt to 28-38 lb-ft (38-51 N-m) using a torque wrench. DO NOT USE AN IMPACT WRENCH.
Figure 2
14.
Check the repair by testing the seat travel.
a.
Move the seat cushion as far back as it will go.
b.
Make note of a reference like the rear edge of the seat release handle.
c.
Mark the rocker panel with chalk at this point.
d.
Measure forward 6 inches (150 mm) and make another chalk mark.
e.
Test the seat travel by lifting the seat back recline release lever or gently pressing down on the foot release lever, see Figure 2.
f.
Repeat this test three times to make sure the results are consistent.
15.
If the seat travel does not meet the above specification, repeat the procedure.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION DESCRIPTION
TIME
891701A
Adjust Seat Track
0.3 Hr.
DEALER CODING
BASIC PART NO. CONDITION CODE
7061704
41
OASIS CODES:
1051
