Festiva L4-81 1.3L SOHC EFI (1989)
Turn Signal Switch: Service and Repair
Combination Switch
Fig. 2 Upper Steering Column Components
1.
Disconnect battery ground cable.
2.
Remove steering wheel as outlined previously.
3.
Remove upper and lower steering column trim covers, Fig. 2.
4.
Disengage wire harness retaining clip, then disconnect harness connectors from back of switch.
5.
Working from below steering column, loosen band clamp securing switch hub to steering column jacket, then pull switch assembly off steering
column.
6.
Reverse procedure to install.
