Festiva L4-81 1.3L SOHC EFI (1989)
Alignment: Service and Repair
Rear
Rear camber and toe-in are determined by the configuration of the trailing arms on the torsion beam rear axle. No provision for adjustment is
provided. The only rear suspension adjustment possible is the lateral positioning of the rear axle. This adjustment should only be performed if replacing
the rear axle assembly. Refer to procedure in Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly, Constant
Velocity Type/Service and Repair section for adjustment procedure.