ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Spark Plug: > < Spark Plug - Seizes or Breaks/Removal Procedure
Page 2
background image

3.

Remove the broken spark plug by inserting a straight-fluted extractor (E-Z Out or equivalent) into the shell and rotating counterclockwise. Be sure
to remove the spark plug gasket from the plug bore in the cylinder head.

CAUTION:
WHILE PERFORMING THE NEXT STEP, DO NOT ALLOW THE ANTI-SEIZE COMPOUND TO CONTACT THE BOOT OF THE SPARK
PLUG WIRE OR THE INSULATOR OF THE SPARK PLUG, AS BOOT DAMAGE AND ENGINE MISFIRE MAY RESULT.

4.

Apply a thin coat of anti-seize lubricant (Permatex # 133AR or equivalent) to the gasket, shell and threads of four new AGS-32C Motorcraft spark
plugs.

5.

Install the spark plugs and tighten to 20-30 N-m (15-25 lb.ft.).

6.

Reinstall the spark plug wire(s).

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under The Provisions Of The Bumper To Bumper Warranty Coverage And Emissions For 1992/93 Models, Basic Warranty Coverage For All
Other Models

OPERATION DESCRIPTION

TIME

932415A

Replace Seized Spark Plug

0.3 Hr.

- Broken Or Unbroken

932415B

Replace Seized Spark

0.6 Hr.

Plugs (2 or more) - Broken 
Or Unbroken

DEALER CODING 

BASIC PART NO.

CONDITION CODE

12405

84

OASIS CODES: 499000

All Technical Service Bulletins for Spark Plug: > < Spark Plug - Seizes or Breaks/Removal Procedure