Festiva L4-81 1.3L SOHC EFI (1989)
Axle Nut: Technical Service Bulletins
Hub and Halfshaft Locknut - Service Tips
Article No. 90-12-5
^
WHEEL BEARING - REAR - HUB LOCKNUT SERVICE TIPS
^
TRANSAXLE - HALFSHAFT LOCKNUT - SERVICE TIPS
FORD:
1988-90 FESTIVA
LINCOLN-MERCURY: 1987-89 TRACER
ISSUE:
The transaxle halfshaft locknuts and rear wheel bearing hub locknuts must be replaced whenever they are removed or loosened.
ACTION:
If service is required, refer to the appropriate Car Shop Manual, Section 11-15 for detailed service information for the rear wheel bearing
hub locknuts or Section 11-16 for the transaxle halfshaft locknuts.
The rear nuts on the RH side of the vehicle have LH threads.
^
Make sure these nuts are turned clockwise to remove them and counter clockwise to install them.
^
Stake the nuts after installation with a small, round tipped chisel.
^
Do not use a sharp chisel.
OTHER APPLICABLE ARTICLES: none
SUPERSEDES:
88-17-6
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:
5960, 3300