Wiper motors
| Description | Type |
| front | Electric, two-speed, self-parking, intermittent wipe |
| rear | Electric, one-speed, self-parking |
Angle between wiper arms and windscreen/rear window
| Description | Angle |
| Windscreen (left-hand drive) | - 4° |
| Windscreen (right-hand drive) | + 4° |
| rear | - 4° |
Capacities (initial fill)
| Description | Liters |
| Reservoir - windscreen and rear window washers without headlamp washers | 3,3 |
| Reservoir - windscreen and rear window washers with headlamp washers | 6,8 |
Washer hose length
| Description | mm |
| Rear hose (valve to rear windscreen washer jet) | max. * 2710 |
| Rear hose (washer pump to non-return valve) | max. * 740 |
| Bonnet hose (non-return valve to T-piece) | max. * 190 |
If the washer hoses are longer, there is a risk of kinking in the area of the right-hand bonnet hinge, which would prevent the washer system from functioning.
Lubricants
| Description | Ford Specification |
| Grease (for wiper linkage bearings/pivot shaft bearing bushes) | SAM-1C-9111-A |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
| Headlamp bolts | 6 | - | 53 |
| Bolts securing windscreen wiper motor to bracket | 10 | - | 89 |
| Bolts securing windscreen wiper motor to bulkhead | 8 | - | 71 |
| Bolts securing rear window wiper motor to tailgate | 8 | - | 71 |
| Lever nut to front wiper motor | 24 | 18 | - |
| Pivot bearing nut | 12 | 9 | - |
| Nut securing wiper arm to output shaft | 18 | 13 | - |
| Bolts of screen washer reservoir | 3 | - | 27 |
| Wheel nuts | 85 | 63 | - |
