ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fuel Charging Wiring Harness > < Fuel Charging and Controls

Fiesta 2002.25 (11.2001-)

Fuel Charging and Controls - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma) - Throttle Body Fiesta 2002.25 (11/2001-)
Removal and Installation

Removal
  1. Disconnect the air cleaner outlet pipe from the throttle body.

  1. Remove the throttle body retaining bolts.

  1. Disconnect the throttle body electrical connector and remove the throttle body.

Installation

  1. To install, reverse the removal procedure.
  1. NOTE:
    NOTE:Do not press the accelerator pedal during the initialization period as this will prevent the complete initialization of the throttle body.
    Turn the ignition key to position II and wait for one minute to initialize the throttle body.
  1. Turn the ignition key to the OFF position.

Fuel Charging Wiring Harness > < Fuel Charging and Controls