ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Clutch System Bleeding - Vehicles With: Automated Gearshift > < Clutch System Bleeding

Fiesta 2002.25 (11.2001-)

Manual Transmission/Transaxle and Clutch - General Information - Gearshift Cable Adjustment Fiesta 2002.25 (11/2001-)
General Procedures

All vehicles
  1. Select the 3rd gear.
  1. Raise and support the vehicle. For additional information, refer to: Jacking (100-02 Jacking and Lifting, Description and Operation).
    For additional information, refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. Remove the gearshift cables cover.
Vehicles built up to 08/2003
  1. Release the selector cable adjuster locking insert (gearshift cable box shown removed for clarity).
    • Press down the orange colored clip.
Vehicles built 08/2003 onwards
  1. Release the selector cable adjuster locking insert (gearshift cable box shown removed for clarity).
    • Pull out the orange colored clip.
All vehicles
  1. NOTE:
    NOTE:Make sure that the selector cable adjuster locking insert returns to the locked position.
    Lock the selector cable adjuster.
    • Press down the clip on the adjuster.

  1. Install the gearshift cables cover.
  1. Lower the vehicle.

Clutch System Bleeding - Vehicles With: Automated Gearshift > < Clutch System Bleeding