Five Hundred 2WD V6-3.0L VIN 1 (2006)
Rear Door Window Glass: Service and Repair
Run and Bracket
REAR DOOR WINDOW GLASS - RUN AND BRACKET
Removal and Installation
1. Remove the rear door trim panel.
2. Remove the rear door module
3. Lower the rear door window glass into the door.
4. Remove the scrivet.
5. Remove the rear door glass top run bolt.
6. Remove the rear door glass inner weatherstrip.
7. Carefully position the glass aside, then remove the rear door glass top run.
8. To install, reverse the removal procedure.