Five Hundred 2WD V6-3.0L VIN 1 (2006)
Trunk / Liftgate Handle: Service and Repair
Liftgate Release Handle
LIFTGATE RELEASE HANDLE
Removal and Installation
1. Remove the liftgate trim panel.
2. Disconnect the liftgate moulding electrical connector.
3. Disconnect the liftgate latch release cable.
4. Remove the 4 nuts and the liftgate moulding.
-
To install, tighten to 6 Nm (53 lb-in).
5. To install, reverse the removal procedure.
