Five Hundred 2WD V6-3.0L VIN 1 (2006)
2. Position the cushion trim cover to the cushion foam pad and install the hog rings.
3. Install the seat wire harness.
Seats with manual recline
4. Position the manual seat backrest adjuster and drive the 2 large roll pins into the cushion pan and through the front manual seat backrest adjuster
eyelets.
Seats with power recline
5. Position the power seat backrest adjuster to the cushion pan and install the 3 bolts.
-
Tighten to 10 Nm (89 lb-in).
6. Drive the 2 large roll pins into the cushion pan and through the front power seat backrest adjuster eyelets.
7. Connect the power seat backrest adjuster electrical connector.
Heated seats
8. Slide the heated seat module onto the bracket, making sure it is locked in place. Connect the heated seat module electrical connector.
Seats with an OCS service kit
9. WARNING: Do not separate components.
CAUTION:
-
Inspect the occupant classification sensor assembly, seat cushion frame and support assembly for any foreign objects before installing
the occupant classification sensor assembly to the seat cushion frame. If any foreign objects are found, remove them. Failure to do so
may result in personal injury in the event of an air bag deployment.
-
Failure to route the seat occupant sensor components through the correct seat cushion support opening can cause component failure.
-
While positioning the seat cushion frame and occupant classification sensor assembly, be careful not to damage any of the
components. Failure to do so can result in component failure.
NOTE: If the original equipment (OE) occupant classification sensor (OCS) is not being installed, install a service kit OCS using all parts in the
kit.
Position the occupant classification sensor assembly to the seat cushion frame.
-
Using a service occupant classification sensor, feed the electronic control unit, electrical connector, wire harness, pressure sensor and hose
through the largest opening at the front of the seat cushion frame support assembly.
-
Position the seat cushion pad and bladder to the seat cushion frame.
