Five Hundred 2WD V6-3.0L VIN 1 (2006)
1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
^
If excessive pitting or damage is present, install new components as necessary.
Camshaft Runout
Special Tool(s)
1. NOTE: Camshaft journals must be within specifications before checking runout.
Use a Dial Indicator Gauge with Holding Fixture to measure the camshaft runout.
^
Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading.
^
If out of specification, install new components as necessary.
