Five Hundred 2WD V6-3.0L VIN 1 (2006)
1. Lubricate the camshafts with clean engine oil and carefully position the camshafts into the cylinder head.
^
Align the camshafts as shown.
2. CAUTION: Do not install the camshaft journal thrust caps until all of the camshaft bearing caps have been installed, or damage to the thrust caps
may occur.
Lubricate the bearing surfaces of the camshaft bearing caps with clean engine oil and install the bearing caps.
^
Loosely install the bolts.
3. Lubricate the bearing surfaces of the camshaft bearing thrust caps with clean engine oil and install the bearing thrust caps.
^
Loosely install the bolts.
