Five Hundred 2WD V6-3.0L VIN 1 (2006)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator
RH
TEMPERATURE BLEND DOOR ACTUATOR - RH
Removal and Installation
1. Lower the glove compartment.
2. Remove the 3 RH temperature blend door actuator screws.
3. Disconnect the RH temperature blend door actuator electrical connector.
4. Remove the RH temperature blend door actuator.
5. To install, reverse the removal procedure.
LH
TEMPERATURE BLEND DOOR ACTUATOR - LH
Removal and Installation
NOTE: The LH temperature blend door actuator can be accessed from below the LH side of the instrument panel.
