Five Hundred 2WD V6-3.0L VIN 1 (2006)
2. Clean the A/C clutch disc and hub, A/C compressor pulley and A/C clutch field coil mounting surfaces.
3. Apply a pea-sized drop of silicone sealant to the thermal limiter socket.
4. Install the A/C clutch field coil.
1
Install the A/C clutch field coil.
2
Install the thermal limiter.
3
Tighten to 6 Nm (53 lb-in).
5. Install the A/C clutch field coil snap ring.
6. NOTE: The A/C compressor pulley is a tight fit on the A/C compressor. It must be correctly aligned during installation.
Install the A/C compressor pulley.
1
Install the special tool.
2
Install the A/C compressor pulley.
7. Install the A/C compressor pulley snap ring with the bevel side out.
8. Place one nominal thickness A/C clutch disc and hub spacer inside the clutch hub spline opening.
9. Install the A/C clutch disc and hub.
10. Install the A/C clutch disc and hub nut.
1
Hold the A/C clutch disc and hub with the special tool.
2
Tighten to 26 Nm (19 lb-ft).