Five Hundred 2WD V6-3.0L VIN 1 (2006)
6. Detach the wire harness from the heater core and evaporator core housing.
7. Remove the 2 floor duct screws.
8. Remove the floor duct.
9. Remove the 6 heater core and evaporator core housing bolts.
-
To install, tighten to 9 Nm (80 lb-in).
10. Remove the heater core and evaporator core housing.
11. To install, reverse the removal procedure.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.