ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fluid Pan, Gasket and Filter|Page 2268 > < Evaporative Canister Filter|Service and Repair|Page 2263
Page 1
background image

Fluid Filter - CVT: Service and Repair
Fluid Pan, Gasket and Filter

Fluid Pan, Gasket and Filter

Special Tool(s)

Material

Removal

CAUTION:  MERCON, MERCON V, MERCON SP, Motorcraft Premium Automatic Transmission Fluid and Motorcraft Continuously Variable
Chain Type Transmission Fluid are not interchangeable transmission fluids. The use of any fluid other than what is recommended for this transmission
will cause transmission damage.

CAUTION:  Do not attempt to clean or flush the oil-to-air (OTA) transmission fluid cooler. Contamination may remain in the cooler and eventually
be returned to the transaxle, causing internal transaxle damage. If the transaxle is to be overhauled or if installing a new transaxle, install a new
transmission fluid cooler.

NOTE:  When carrying out a fluid change interval, the removal of the fluid pan and filter is not required. When carrying out a fluid change interval,
the installation of a new high-pressure case filter and seals is required.

Fluid pan and filter

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.

2. Remove the fluid pan drain plug and allow the fluid to drain.

Fluid Pan, Gasket and Filter|Page 2268 > < Evaporative Canister Filter|Service and Repair|Page 2263