Five Hundred 2WD V6-3.0L VIN 1 (2006)
4.
Remove the fuel cap from the filler pipe and the tether end from the attachment screw on the filler pipe flange.
5.
Reinstall the screw to the filler pipe flange.
NOTE
REPLACE ONLY NON-LOCKING WITH NON-LOCKING CAPS AND LOCKING WITH LOCKING CAPS.
6.
Install the revised fuel cap into the filler pipe.
7.
Attach tether in counterclockwise direction from attachment point on vehicle by inserting the push pin into the drilled hole. This is the opposite
direction from cap being removed. (Figure 1)
Service Procedure B
Install revised fuel cap (hole already in correct position - 3 o'clock) following Steps 6 and 7 of Service Procedure A.
Service Procedure C
Install revised fuel cap by attaching to existing hole in fuel door hinge, not the original fuel filler pipe location.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
071609A
2005 Five Hundred,
0.5 Hr.
Freestyle, Montego: Check
For DTC, Replace The
Fuel Filler Cap Includes
Time To Drill Hole To
Relocate Tether And Clear
Codes (Do Not Use With
9030A, 12650D)
071609B
2006-2007 Five Hundred,
0.3 Hr.
Freestyle, Montego: Check
For DTC, Replace The
Fuel Filler Cap, Includes
Time To Clear Codes (Do
Not Use With 9030A,
12650D)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
9030
69
Disclaimer