Five Hundred 2WD V6-3.0L VIN 1 (2006)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the RH cowl side trim panel.
3. Disconnect the inertia fuel shutoff (IFS) switch electrical connector.
4. Remove the 2 IFS switch retaining bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
5. Remove the IFS switch.
6. To install, reverse the removal procedure.