Five Hundred 2WD V6-3.0L VIN 1 (2006)
4. Disconnect the large RCM electrical connector.
1
Pinch the thumb tab and pivot the connector position assurance lever all the way back until it stops.
2
Pull out and disconnect the large RCM electrical connector.
5. Remove the 3 RCM bolts.
6. Remove the RCM.
Installation
1. Position the RCM.
2. WARNING: The tightening torque of the air bag restraints control module (RCM) retaining bolts is critical for correct system
operation.
Install the RCM bolts.