Five Hundred 2WD V6-3.0L VIN 1 (2006)
Wheel Speed Sensor: Service and Repair
Front
Wheel Speed Sensor - Front
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the 2 scrivets and position aside the fender splash shield.
4. Remove the wheel speed sensor harness pin-type retainer.
5. Remove the 2 wheel speed sensor harness retainers.
6. Remove the bolt and the wheel speed sensor.
^
To install, tighten to 8 Nm (71 inch lbs.).
7. To install, reverse the removal procedure.